General information:

The Silentwind-Charge controller HYBRID 1000 is a combined wind and solar charge regulator with an inbuilt micro-controller. The HYBRID 1000 was especially developed for the Silentwind Generator and enables you additionally to install solar panels up to a wattage of 550 Watt peak or to a max. current of 40A.

Consumers with a maximum current of 15 Amps that are connected to the deepcycle output can be automatically switched off or on by a deep cycle protection function.

All operating parameters can be seen on an LCD-display.

You can adjust the charge regulator with 5 touch keys on the right and left of the LCD-display.

A LED´s on top of the controller additionally informs you about the operating status “brake active”.

A LED on top of the case, below the LCD-display, additionally informs about the either manually or automatically activated brake function.

A thermally switched vent provides the correct operating temperature.

The Silentwind Generator generates 3phase AC-voltage. In the charge controller AC is transformed to DC voltage. 12 or 24 voltage is automatically detected after the first installation. All types of lead batteries (Gel, AGM and acid) can be charged.

The suitable maximum charge voltage - depending on the type of battery - must be adjusted in the Setup.

Write a review

Note: HTML is not translated!
    Bad           Good

Do you have any questions about Silentwind Hybrid 1000 Wind/Solar Charge Controller (DISCONTINUED available as replacement for old model Silentwind 2014)?

Silentwind Hybrid 1000 Wind/Solar Charge Controller (DISCONTINUED available as replacement for old model Silentwind 2014)

  • Brand: Silentwind
  • Product Code: Hybrid 1000 Wind/Solar Charge Controller
  • Availability: In Stock
  • €374.85

  • Ex VAT: €315.00